Professional China 25MM Ratchet Strap RS2501 Supply to Kuala Lumpur
Professional China 25MM Ratchet Strap RS2501 Supply to Kuala Lumpur Detail:
Length: 5m, 6m, 8m, 10m or customized
Color: blue, orange or customized
Material: steel, 100% tenacity polyester
Working load limited: 400daN
Breaking strength: 800daN
Standard: EN12195-2; AS/NZS 4380:2001
Usage: cargo lashing
Sample time: 1-3 working days
Production time: 30-40 days after sample approval
Packing details: export carton with solid pallet package
Shipment: By sea, air or express
Payment terms: 30% deposit in advance and the balance against copy of BL after shipment
For ratchet buckle and hooks
1)Yellow zinc plated
2)White zinc plated
4)Black electrophoretic plated
For webbing parameter alternative
2.Required elongation rate
3.Different woven methods & logo printing
- Do not use the ratchet strap for lifting.
- Do not use the damaged ratchet strap.
- Do not use the webbing knot.
- Do not wring or twist the ratchet strap.
- Keep the webbing away from sharp or abrasive edges.
- Periodically inspect the ratchet strap to ensure the tie-down or webbing in good condition, or replace the strap at once.
Product detail pictures:
Our well-equipped facilities and exceptional top quality management throughout all stages of generation enables us to guarantee total buyer gratification for Professional China 25MM Ratchet Strap RS2501 Supply to Kuala Lumpur, The product will supply to all over the world, such as: Florence, New Zealand, Bangalore, All the employees in factory, store, and office are struggling for one common goal to offer better quality and service. Real business is to get win-win situation. We would like to deliver more support for customers. Welcome all nice buyers to communicate details of our products and solutions with us!
Alright Crusader, now it’s time for the real challenge, the reason you’re here, the first duty of being a Crusader, fix those light beams and divert them properly to stop the mass deaths of the ships, do it fast or risk getting crushed by debris!
DIY Video on how to install heated seats in your car. The video also goes through the procedure for replacing the leather or cloth seat coverings.
Adding heated seats to your car will give you extra comfort on cold winter days, especially if the seats are leather trimmed.
A seat heater kit was bought from eBay that includes a two pads for each seat (total of four pads), one for the chair back and one for the seat cushion. A wiring harness with a relay, fuse and switch are included.
This video takes you through the process of removing the seat from your car, disassembling the seat cushions, removing the upholstery (leather or cloth), installing the heat pad, and then reinstalling the coverings. The chairs are then reinstalled into the car, where the consoles are taken apart and wiring to the fuse-box is demonstrated.
The use of hog rings are recommended to hold the upholstery and seat coverings together, however zip ties can be used in place.
The kit is universal and easy to use and requires little electronics knowledge, with the help of a fuse tap and eye-lit.
The pads are carbon fiber weaved within a cloth backing, and comes with double sided tape to be applied to the sponge. It can be cut in the middle (where the weaving is, but not the outside edges) and is roughly the size of an 11″x17″ sheet of paper.